Pluto Trigger - Manual (Page 32)

6.1 S
OUND
This mode is similar to the Sound Mode in the Pluto Sensor Modes. The
difference is that it uses the microphone on your smart phone, and it may
not be as fast as the sound sensor of Pluto Trigger.
6.2 V
IBRATE
Vibration Mode uses the accelerometer of your smart phone to detect
vibrations. And if the vibration exceeds the set threshold, Pluto Trigger fires
your camera.
6.3 M
OTION
Motion Mode uses the camera of your smart phone to detect motions.
You can zoom in/out your camera to define the field of view. This is really
useful if you want to take photos only when the subject enter into a certain
small area, and don’t want to put your phone too close to it.
You can adjust the sensitivity, as you need. To detect small subject, make
the sensitivity higher. A value bar above the preview indicates the
real-time level of motion.
6.4 D
ISTANCE
Distance Mode is good to take photos when you travel in your car.
Compared with taking photo at a specific interval, using distance
parameter will make you get better output footage. It will not take a lot of
photos when you just stop your car waiting.
6.5 V
OICE
While Sound Mode only takes sound volume into account, Voice
Command Mode is much smarter. It recognizes the voice command