Pluto Trigger User Manual
Page 29
Droplet mode is a mode to help you to take photos of water drop collision
easily. You will need a Valve Kit to use this mode. Visit our website
plutotrigger.com
for details of the Valve Kit.
When the start button is pressed, Pluto Trigger starts camera exposure using
IR remote, triggers the valve to release two droplets, fires the flash, and
finally the camera stops exposure. The entire procedure is controller by
Pluto Trigger automatically. The droplet photo should be taken in relatively
dark environment.
Usage
1.
Install the Valve Kit onto a tripod, fill in water and supply power. Put a
container under the valve kit.
2.
Connect your flashgun to the camera port of Pluto Trigger using PC sync
cable; Connect valve kit to the AUX port of Pluto Trigger using 2.5mm