Pluto Trigger - Manual (Page 38)

8.4 LED
Default: “Periodic blink”
Change this setting to set when the Status Led show notifications.
1 Off All led notifications are turned off
2 Program Start/End
Blink led when Program starts or stops
running
3 Camera Trigger Blink when Pluto trigger your camera
4 Periodic Notification
Blink every 5 seconds, indicating Pluto is
power on
5 Always On
Led is always on to show remaining
power
8.5 S
OUND
Use this setting to enable/disable the App sound notification.
8.6 R
ESET
Reset all the settings to default values.
8.7 F
IRMWARE
U
PGRADE
When new version is available, you can upgrade the firmware in Pluto
Trigger over the air.
To upgrade firmware, follow the instructions in the app.
9 F
REQUENTLY
A
SKED
Q
UESTIONS
 The font of this manual is too small, how to make it easy to read?
Rotate your iPhone to Landscape orientation, and the font will be more
readable.
 Is my camera is supported?