Pluto Trigger - Manual (Page 22)

2. If your camera supports controlling video recording by shutter release
cable, connect Pluto Trigger to camera with shutter release cable. If
your camera supports controlling video recording by infrared remote,
point Pluto Trigger to the IR receiving window and switch your camera to
IR remote drive mode.
3. Start Pluto Trigger app on your phone; connect to Pluto Trigger with
Bluetooth; switch to “Video” mode.
4. If you are controlling video recording with IR remote, you will need to set
“IR Remote Mode” to “Video” and set “Camera Brand” to the brand of
your camera. See the “Settings” chapter for details.
5. Set the duration, retrigger interval and start delay.
6. Press the "Start" button and your camera will start recording video.
4.6 T
IMER
Timer mode is used to take photos or record video at certain time period of
each day. This is usually useful for Time-lapse of infrastructure projects or
growing plants. You need to supply power to camera and Pluto Trigger
with AC adaptor for that long period.
You can set the Start Time and End Time to take photos or record video. To
take photos, you have the option to set the interval to take photo. And if
you are recording video, you can set the retrigger time to 30mins and
3secs to overcome the 30mins recording limit.
5 P
LUTO SENSORS
Pluto trigger is an advanced MCU controlled device, which has several
sensors embedded in. These sensors are ideal for high-speed photography
and trigger traps.