Pluto Trigger - Manual (Page 21)

Usage
1. Connect Pluto Trigger and set up your camera as described in “HDR”
mode section.
2. Start Pluto Trigger app on your phone; connect to Pluto Trigger with
Bluetooth; switch to “Star Trail” mode.
3. Choose number of shots, exposure time, and gap time and start delay.
4. Press the "Start" button and a series of images will be taken.
NOTE : Enable Live View on your camera to avoid the vibration caused by
mirror flipping.
4.5 V
IDEO
Video mode is used to overcome the 30 minutes limit of the DSLR camera’s
video recording capability. When the recording reaches 30 minutes,
camera will stop the recording automatically. Pluto Trigger will restart the
video recording immediately.
NOTE 1 : Only some cameras are supported in this mode. Pluto Trigger
start/stop video recording using shutter release cable or infrared remote.
Only a few cameras support controlling video recording with shutter
release cable. Some other cameras support
controlling video recording
with infrared remote, like Canon 70D.
NOTE 2 : If your camera supports start/stop video recording by half pressing
shutter button like Magic Lantern, set “Shutter Pulse Time” to “Off” and “Pre
Focus Time” to 0.5” to use the Video mode.
Usage
1. Turn on your camera, switch to video mode.