SIONYX Aurora PRO Night Vision Camera - Manual (Page 15)

Aurora User Manual
16
Chapter 1. Getting Started
4. Toggle down to Date and Time and toggle right to the Date and Time options.
5. You can either set the time by GPS (Aurora 'classic' and Pro only) (see “Section 4.4.1 GPS Set” on page 80 ) or
manually. You can also change the format of the date and time (see “Section 4.4.2 Format” on page 83).
To set the date and time manually, toggle down to Manual Set.
When your SiOnyx Aurora is powered on f or the first time , you will be prompted to set the date and time.
This prompt will persist until the date and time has been set.
1. Rotate the Settings Dial to the WiFi & Settings position.
2. Toggle down to Date and Time and then right to Manual Set.
3. Toggle right to Date and press SET. The date at the top of the menu is now in change mode.