SIONYX Aurora PRO Night Vision Camera - Manual (Page 41)

Aurora User Manual
45
Chapter 2. Photos and Videos
4. Press SET to exit out of the menu. The Panorama setting will be visible in the V iewfinder .
5. To take a panorama photo, press the Shutter button. You’ll see a gray bar either on the left side of the
screen (Landscape) or on the bottom of the screen (Portrait). Move the camera either up and down
(Portrait) or left and right (Landscape). As you move the camera, you’ll see the gray bar progress across
the bottom of the screen.
Your Panorama must be between 90 degrees and 180 degrees. If it is less, or if you move the camera too
quickly, you’ll see an error message: “Swing Range Error.” If you don’t want to go the full 180 degrees,
press the Shutter button to stop taking the photo.
2.3.6 Time Lapse
The Time Lapse feature which allows you to set the camera to take a certain number of photos per hour for a
selectable number of hours. Once the time lapse is complete, the camera will create a video.
The camera will take photos at the rate of one per hour up to as many as 60 per hour.
You can also have the camera take photos over a set time period using the Time Lapse duration feature. This
means the camera can take photos for one hour up to 24 hours.
1. Turn the camera on by rotating the Settings Dial to Photo Mode .