SIONYX Aurora PRO Night Vision Camera - Manual (Page 70)

Aurora User Manual
80
Chapter 4. WIFI/Settings Mode
2. Toggle down to Calibrate Compass and right to access the animated instructions.
3. If you’ve calibrated correctly, you will see this message: “Compass Calibration Successful.”
If the compass fails to calibrate, you’ll hear a boing sound and see a message that says: “Retry compass
calibration.”
4.4 Date and Time
To set the date and time, see “Section 1.5 Setting the Date and Time” on page 15 . You can also set the date
and time and change the format under GPS Set.
4.4.1 GPS Set (Aurora 'classic' and Pro only)
You can have the GPS set the time.
1. Turn the camera on by rotating the Settings Dial to WiFi/Settings Mode to access the menu .