Chapter 6. troubleshooting, Error issue how to fix – SIONYX Aurora PRO Night Vision Camera User Manual
Page 87

Aurora User Manual
98
If an error occurs when using the camera, a message will display in the V
iewfinder
. A corresponding red light
will also flash on the side of the camer
a.
Error
Issue
How to Fix
Camera
Overheating
If the temperature of the camera
reaches 104 °F (40 °C) it will shut down
automatically.
Camera will work when temperature
reaches operating range.
Low Battery
The batter
y is not sufficien
tly charged to run
the camera.
Charge the battery.
No SD Card
Inserted
SD card is not inserted
Remove message by pressing the SET
button. Install an SD Card.
Unformatted
SD Card
SD Card is unformatted.
Format SD Card.
SD Card Error
When SD card is not recognized.
If SD Card is above 32 GB card will not
work. Install 32 GB SD card.
(PRO = 256GB)
SD Card is full
When there is no space left on SD Card.
Replace with new SD Card or delete images
from current SD Card.
Please set date
and time
Out-of-box or aft
er fir
mware update.
Remove message by pressing the SET
button. Set date and time.
WIFI connection
lost
When the WiFi connection is lost.
Shows message until WiFi is reestablished or
Mode on Settings Dial is changed.
WIFI connection
not found
When the WiFi connection is not found.
Shows message until WiFi is established or
Mode on Settings Dial is changed.
Swing range
error
When Panorama mode is on and swing
direction is wrong or movement is too fast.
Message will disappear automatically.
Repeat Panorama process.
No Satellites
W
hen the GPS cannot find a sa
tellite signal
for 5 minutes after being set to On.
Camera needs to be outdoors with a clear
view of the sky.
No Photo
In Playback mode when there is no image to
display.
In Playback mode there are no photos to
display on SD Card. Turn Settings Dial to
another Mode.
Chapter 6. Troubleshooting