HP 9000 V2600 SCA - Manual (Page 19)

Preface xix
Preface
Installation conditions (U.S.)
See installation instructions before connecting to the supply.
Voir la notice d’installation avant de raccorder au réseau.
CAUTION Please note the following conditions of installation:
An insulated earthing conductor that is identical in size, insulation
material, and thickness to the earthed and unearthed branch-circuit
supply conductors except that it is green with or without one or more
yellow stripes is to be installed as part of the branch circuit that
supplies the unit or system. The earthing conductor described is to be
connected to earth that the service equipment or, if supplied by a
separately derived system, at the supply transformer or motor-
generator set.
The attachment-plug receptacles in the vicinity of the unit or system
are all to be of an earthing type, and the earthing conductors serving
these receptacles are to be connected to earth at the service
equipment.
CAUTION For supply connections, use wires suitable for at least 60 °C.
Utillser des fils convenant à une température de 60 °C pour les
connexions d’allmenation.
Fuse cautions
CAUTION Disconnect power before changing fuse.
Attention Coupier le courant avant de remplacer le fusible.
CAUTION For continued protection against risk of fire, replace fuses only with
same type and rating.
Attention Pour ne pas compromettre la protection contre les risques d’incendle,
remplacer par un fusible de même type et de mêmes caractéristiques
nominales.