HP 9000 V2600 SCA - Manual (Page 91)

Chapter 4 69
Firmware (OBP and PDC)
HElp command
HElp command
The help command displays help information for the specified command
or redisplays the boot menu.
Syntax
HElp [command]
Used alone, HElp displays the boot menu. Specifying command displays
the syntax and description of the named command.
Examples
The following example illustrate use of this command:
help au This command displays information for the auto
command.
AUto[BOot|SEArch] [ON|OFF] Display or set the specified flag
AUto boot on Enable auto boot on next boot.
AUto boot off Disable auto boot on next boot.
AUto search on Enable auto search on next boot.
AUto search off Disable auto search on next boot.
Auto search enables the automatic search of a boot device.
Auto boot enables the autoboot sequence.