HP 9000 V2600 SCA - Manual (Page 85)

Chapter 4 63
Firmware (OBP and PDC)
Boot process output
-------------------------------------------------------------------------------
PDC Firmware Version Information
PDC_ENTRY version 4.2.0.4
POST Revision: 1.0.0.2
OBP Release 4.2.0, compiled 99/01/06 14:00:18 (3)
SPP_PDC 2.0.0 (03/08/99 11:47:51)
-------------------------------------------------------------------------------
Multi-node Configuration Summary
===============================================================================
NODE 0
UART? No
CORE MAC address 0:a0:d9:0:bf:16 IP# 15.99.111.166 (0x0f636fa6)
JTAG MAC address 0:a0:d9:0:bf:3 IP# 15.99.111.116 (0x0f636f74)
MEMORY 2048 MB memory installed 1024 MB CTI cache configured
CPUs 8
PACs 0,1,2,3,4,5,6,7 MACs 0,1,2,3
TACs 0,1,2,3 PCIs 0,3,4,7
-------------------------------------------------------------------------------
NODE 2
UART? No
CORE MAC address 0:a0:d9:0:be:eb IP# 15.99.111.167 (0x0f636fa7)
JTAG MAC address 0:a0:d9:0:c3:a3 IP# 15.99.111.117 (0x0f636f75)
MEMORY 2048 MB memory installed 1024 MB CTI cache configured
CPUs 15
PACs 0,1,2,3,4,5,6,7 MACs 0,1,2,3
TACs 0,1,2,3 PCIs 2,6
-------------------------------------------------------------------------------
4096 MB memory installed 2048 MB CTI cache configured (total, all nodes)
Primary boot path = 1/0/0.6.0
Primary boot arguments =
Alternate boot path = 15/3 NFS 15.99.111.99:/spp/os/uxinstlf
Alternate boot arguments =
Console path = 15/1
Keyboard path = 15/1
[*** Manufacturing (or Debug) Permissions ON ***]
System is HP9000/800/V2500 series
Autoboot and Autosearch flags are both OFF or we are in HP core mode.
Processor is entering manual boot mode.