HP 9000 V2600 SCA - Manual (Page 107)

Chapter 5 85
Configuration utilities
ts_config
Figure 42 Terminal mux IP address panel
Remove terminal mux
ts_config does not remove the terminal mux if any node consoles are
assigned to terminal mux ports.
Step 1. Select “Actions,” then “Configure Terminal Mux.”
Step 2. Select “Remove Terminal Mux,” then click “Yes.”
Console sessions
ts_config may also start console sessions by selecting the desired
node(s) and then selecting the “Start Console Session” action as shown in
Figure 43. Figure 44 shows the started console sessions.