HP 9000 V2600 SCA - Manual (Page 84)

62 Chapter 4
Firmware (OBP and PDC)
Boot process output
Boot process output
The following output illustrates what typically displays on the console as
the system starts up:
POST Hard Boot on [0:PB4L_A]
HP9000/V2500 POST Revision 1.0.0.2, compiled 1999/04/12 11:51:10
Probing CPUs: PB4L_A
Completing core logic SRAM initialization.
Starting main memory initialization.
Probing memory: MB0L MB1L MB2R MB3R
Installed memory: 2048 MBs, available memory: 2048 MBs.
Initializing main memory.
r0 r1 r2 r3
PB4L_A MB0L [:::: ____][:::: ____][____ ____][____ ____]
PB4L_A MB1L [:::: ____][:::: ____][____ ____][____ ____]
PB4L_A MB2R [:::: ____][:::: ____][____ ____][____ ____]
PB4L_A MB3R [:::: ____][:::: ____][____ ____][____ ____]
Building main memory map.
Main memory initialization complete.
Starting multinode initialization.
Collecting memory configuration from nodes: 0,2
Initializing ERI rings for node 0,2
Synchronizing nodes: 0,2
Initializing CTI cache.
r0 r1 r2 r3
PB4L_A MB0L [LLLL ____][CCCC ____][____ ____][____ ____]
PB4L_A MB1L [LLLL ____][CCCC ____][____ ____][____ ____]
PB4L_A MB2R [LLLL ____][CCCC ____][____ ____][____ ____]
PB4L_A MB3R [LLLL ____][CCCC ____][____ ____][____ ____]
Synchronizing nodes: 0,2
Verifying remote memory access.
Enabling Time of Century synchronization routing.
Synchronizing nodes: 0,2
Multinode initialization complete.
Booting OBP
OBP Power-On Boot on [0:8]
Node 0 OBP attempting to synchronize with node 2.
Node(s) { 2 } now synchronized.