Henny Penny HCS-2 - Manual (Page 19)

Model HCS-2,HCW-3/HCW-5/HCW-8
2-13. THERMOSTAT 5. Remove the sensor bulb by pulling on the capillary tube.
(Continued)
6. Remove the two mounting screws from the thermostat.
7. Install a new thermostat in reverse order.
8. Replace the end panel.
9. Turn on the power supply at the breaker box.
2-14. INDICATING LIGHT 1. Remove electrical power supplied to the cabinet.
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Remove the control side end panel.
103 2-11
Step 5
Step 6