Henny Penny HCS-2 - Manual (Page 28)

Model HCS-2,HCW-3/HCW-5/HCW-8
2-22. CONVERSION • Connect the wire coming from the fuse in the HCW-2
(Continued) to the L
2
screw-clamp terminal block. This should make
a total of 3 wires in this block.
• By using a two-blade quick-connect adaptor, connect
the remaining wire to the neutral (N) quick-connect
terminal block.
• Be sure to study enclosed marked field wiring diagram
accompanying the HCW-2.
Your wiring now should match that of a standard HCW-5.
8. Test out all systems.
9. Replace the end panels.
2-20 103