Henny Penny HCS-2 - Manual (Page 6)

Model HCS-2,HCW-3/HCW-5/HCW-8
PROBLEM CAUSE CORRECTION
THERMOMETER
A. Reading does • Thermometer bulb is not in • Insert bulb in block
not match holding block
actual
temperature
• Faulty thermometer • Replace per Thermometer
section
OPERATIONS
A. Product not • Doors are not kept closed • Keep doors closed when
holding possible
temperature
• Product held too long • Only hold product for
recommended times
• Water temperature too low • Check water heating system
per Water Pan Heater section
• Radiant heat too low • Turn to higher setting
• Radiant heat not working • Check radiant heat system per
Radiant Heater section
• Light bulbs out • Replace as required, per
Light Bulb section
B. Doors are • Doors left open too much • Keep doors closed when
fogging allowing doors to cool and possible
cause condensation
• Radiant heat not high enough • Turn to higher setting
• Radiant heat not working • Check radiant heater per
Radiant Heater section
• Water temperature too high • See recommended settings
and temperatures
1-2 103
1-3. TROUBLESHOOTING (Continued)