Hitachi PJ-LC9 - Manual (Page 10)

8
Preparations
Preparations
Fastening the lens cover
To avoid losing the lens cover, please fasten the projector using the strap.
1. Slowly turn over the projector,
so that the bottom is facing up.
2. Fix the strap to the strap
ring of the projector.
3. Fix the strap to the strap
ring of the lens cover.
4. Attach the lens cover to
the lens of the projector,
and slowly turn over the
projector, so that the top
is facing up.
►Do not fasten the lens cover during use or immediately after
use. Handling while the projector is in a high temperature could cause a burn
and/or malfunction to the projector.
►Close the lens cover to prevent the lens surface being
scratched when the projector is not used.
WARNING
CAUTION
Strap ring
Projector (Bottom side)
Strap
Strap ring
Strap
Strap ring
(1) (2)
Strap
Strap ring
Strap
Strap ring
(2) (1)
Lens cover