Hitachi PJ-LC9 - Manual (Page 21)

19
ENGLISH
Power on/off
Power on/off
Turning on the power
1. Make sure that the power cord is firmly and correctly connected to the
projector and the outlet.
2. Open the lens cover, and set the power
switch to the ON position.
The power indicator will light up in steady
orange. Then wait several seconds because
buttons may not function for these several
seconds.
3. Press the STANDBY/ON button on the
projector or the remote control.
The projector lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in green.
To display the picture, select an input signal according to the section "Selecting an
input signal" (22).
►When the power is on, a strong light is emitted. Do not look into
the lens and openings of the projector.
WARNING
• Turn the power on in right order. Please power on the projector prior to
the connected devices.
NOTE
STANDBY/ON
button
VIDEO RGB SEARCH
FREEZE
OFF
ON MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
ZOOM + -
POWER indicator
Power switch
STANDBY/ON
INPUT
MENU
LAMP
TEMP
POWER
POWER
(Steady orange)
POWER
(Blinking in green)
POWER
(Steady green)