Hitachi PJ-LC9 - Manual (Page 44)

42
Multifunctional settings
SCREEN menu (continued)
Item Description
START UP
Using the buttons ▲/▼ switches the mode for the start up screen.
The start up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen  ORIGINAL  TURN OFF
MyScreen is a screen you can register as a desired screen. The
ORIGINAL screen is the existing standard screen. When the TURN
OFF is selected, the BLACK screen is used.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK screen after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it
will change to the BLACK screen.
• For the MyScreen, please refer to the item MyScreen below. About the
BLACK and BLANK screens, please refer to the item BLANK. (41)
MyScreen
This item functions for capturing the MyScreen of the blank screen
and the start up screen. Please execute displaying the input
including the picture you want to capture.
1. Choosing this item displays a dialog titled “MyScreen”.
It will ask you if you start capturing the
picture from the current screen. Please
wait for the target picture to be displayed.
2. Press the ENTER button when the picture is display.
The picture will freeze and the frame for
capturing appears. To restore the screen
and return to the previous dialog, press
the RESET or ESC button.
3. Using the buttons ◄/►/▲/▼adjusts
the frame position.
Please move the frame to the position of
the picture which you want to use.
Although the adjustable range will vary depending on inputs, and
the frame may not move for some signals. To restore the screen
and return to the previous dialog, press the RESET or ESC
button.
4. To start registration, press the ENTER
button.
• Registration takes several minutes. When the registration is
completed, the registered screen and the message “MyScreen
registration is finished.” are displayed for several seconds. If the
registration failed, the message “A capturing error has occurred.
Please try again.” is displayed.
MyScreen
Do you start capturing this picture?
, + :NO ESC , :YES ENTER
MyScreen
Move the capture area
as you want.
, + :RETURN ESC , :NEXT ENTER
My Screen
45%