Hitachi PJ-LC9 - Manual (Page 37)

35
ENGLISH
Multifunctional settings
PICTURE menu (continued)
Item Description
PROGRESSIVE
Using the buttons ▲/▼ switches the progress mode.
TV  FILM  TURN OFF
• This function is performed only for an interlaced signal of a VIDEO
input, an S-VIDEO input or a component video input of 525i (480i)
or 625i (576i) signal.
• When the TV or FILM is selected, the screen image will be sharp.
The FILM mode can also be used for the 2-3 Pull-Down conversion
system (not be used for the 2-2 Pull-Down system). But these may
cause a certain defect (for example, jagged line) of the picture for a
quick moving object. In such a case, please select the TURN OFF,
even though the screen image may lose the sharp.
MY MEMORY
Choosing a mode of MY MEMORY using the buttons ▲/▼ and then
pressing the button ► or the ENTER button performs each function.
LOAD1  LOAD2  LOAD3  LOAD4
SAVE4 SAVE3  SAVE2  SAVE1
This projector has 4 numbered memories for adjustment data.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data
on the memory whose number corresponds to the command’s
number, and adjusts the picture automatically depending on the
data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current
adjustment data on the memory whose number corresponds with
the command’s number.
• The current adjustment data of the items in the PICTURE menu is
stored. Except for the adjustment data in the CUSTOM modes for
the GAMMA (33) and COLOR TEMP items. (34)