Hitachi PJ-LC9 - Manual (Page 38)

36
Multifunctional settings
With the IMAGE menu, the items shown in the table below
can be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
IMAGE menu
Item Description
ASPECT
Using the buttons ▲/▼ switches the mode for aspect ratio.
For an RGB signal
4:3  16:9  NORMAL
For a video signal, s-video signal or component video signal
4:3  16:9  WIDE  MOVIE1  MOVIE2
For no signal
4:3  16:9
• The NORMAL mode keeps the original aspect ratio of the signal.
• For an HDTV component video signal of 1125i (1080i) or 750p
(720p), this item cannot be chosen.
• Performing the automatic adjustment initializes the aspect ratio
setting.
• While setting the WIDE mode, the correction of keystone distortion
is not effective. (25, 40)
• Setting the WIDE mode may limit the magnify range. (26)
For a 16:9 signal
For a 4:3 signal
MENU [RGB] :SELECT
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MENU ASPECT
OVER SCAN
V POSITION
H POSITION
H PHASE
H SIZE
AUTO ADJUST EXECUTE 4:3
5
25
142
16
1344
MOVIE1 4:3 16:9
MOVIE2
WIDE
MOVIE1 16:9 4:3 WIDE MOVIE2