Warranty and after-service, Specifications – Hitachi PJ-LC9 User Manual

Page 60

Advertising
background image

58

Warranty and after-service / Specifications

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” (53~57)

and run through the suggested checks.

If this does not resolve the problem, please contact your dealer or service company.

They will tell you what warranty condition is applied.

Specifications

• These specifications are subject to change without notice.

NOTE

Item

Specification

Product name

Liquid crystal projector

Liquid

Crystal

panel

Panel size

1.4 cm (0.55 type)

Drive system TFT active matrix
Pixels

415,272 pixels (858 horizontal x 484 vertical)

Lens

F=1.65 f=20.4 mm

Lamp

165W UHB

Power Supply

AC100-120V/2.7A, AC220-240V/1.5A

Power Consumption

240W

Temperature range

5 ~ 35°C (Operating)

Size

285 (W) x 73 (H) x 202 (D) mm

(Not including protruding parts)

• Please refer to the following figure.

Weight (mass)

2.2 kg

Ports

RGB input:

RGB .......D-sub 15pin mini x 1
Communication port:

CONTROL .......... D-sub 9pin x 1
Video input:

VIDEO ...................... RCA x 1

S-VIDEO .............S-Video x 1
Audio input:

AUDIO ........... Stereo mini x 1

Optional

parts

Lamp

DT00707

Air filter

NJ22642

Others

• Please consult your dealer.

Advertising