Hitachi PJ-LC9 - Manual (Page 40)

38
Multifunctional settings
IMAGE menu (continued)
Item Description
AUTO ADJUST
EXECUTE
Choosing this item performs the automatic adjustment feature.
For an RGB signal
The vertical position, the horizontal position, the clock phase and
the horizontal size will be automatically adjusted. And the aspect
ratio will be automatically selected.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
For a video signal or s-video signal
The video format best suited for the respective input signal will be
automatically selected.
This function is available only when the AUTO mode is selected to
the VIDEO FORMAT item in the INPUT menu. (39)
And the aspect ratio will be selected automatically.
For a video signal, s-video signal or component video signal
The vertical position and horizontal position will be automatically
adjusted.
For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
• The automatic adjustment operation requires approximately 10
seconds. Also please note that it may not function correctly with
some input.