HP 1100AHP - Manual (Page 105)

C4224-90962 Internal assemblies 103
Paper pick-up assembly removal
Figure 4-39 Accessing the paper pick-up assembly area
Prior to this step: Remove the memory card (if applicable), scanner, pods, front door, front
cover, back cover, paper guide, top cover; and disconnect the laser/scanner.
1 Remove the screw attached to a bracket at the right end of the cover plate (callout 1).
2 Remove the two top screws attached to the right and left of the plate (callouts 2 and 3).
3 Remove the two screws located underneath the plate, securing it to the Paper Pick-up
Assembly (callouts 4 and 5).