Gear train motor and solenoid removal – HP 1100AHP User Manual
Page 97
Advertising
C4224-90962
Internal assemblies
95
Gear train motor and solenoid removal
Figure 4-32
Removing the motor cable connection to the gear train cover
Prior to this step: Remove the pods, memory card (if applicable), scanner, back cover,
printer door, paper guides, and front cover.
The Gear Train, located behind the metal plate (Gear Train Cover) on the left side of the
printer, must be removed to access the Pressure Roller.
1
Disconnect the motor cable connection at the back of the printer.
Advertising