HP 1100AHP - Manual (Page 29)

C4224-90962 HP LaserJet 1100 Printer control panel 27
Table 2-1. Control panel light messages
Light status Condition of the printer Action
PowerSave mode
(or the printer is off)
The printer uses PowerSave
mode to conserve energy.
Low power consumption mode. Pressing the
Go key on the printer control panel or
printing will awaken the printer from
PowerSave mode. Check the power cord if
the above actions do not generate a
response (and the power switch if your
printer is powered with 220-240 volts).
Ready
The printer is ready to print.
No action is necessary; however, if you press
and release the Go key on the printer control
panel, a self-test page will print.
Processing
Self test page
Form Feed
The printer is receiving or
processing data.
Wait for the job to print.
Buffered data
The printer memory is retaining
unprinted data. A file has been
sent to the printer that does not
contain a from feed at the end.
Press and release the Go key on the printer
control panel to print the remaining data.
Manual feed
The printer is in manual feed
mode. The printer is waiting for
a different size sheet of paper to
be placed in the Single Sheet
Input Slot or Paper Input Bin.
Check that you have loaded the correct
paper, then press and release the Go key on
the printer’s Control Panel to print. Manual
feed is controlled by the software. If you do
not want to be in manual feed mode, change
the setting in your printer properties.
Door open, no Toner Cartridge,
or paper jam
The printer is in an error state.
Check the following:
● The printer door is closed.
● The Toner Cartridge is correctly installed
in the printer.
● There are no paper jams.
Paper out
The printer is out of paper.
Load paper into the printer.