HP 1100AHP - Manual (Page 117)

C4224-90962 Bottom assemblies 115
Paper feed assembly removal
Figure 4-51 Removing the paper feed assembly (continued on next page)
Prior to this step: Remove the scanner, pods, doors, back cover, front cover, formatter;
disconnect the ECU cable; and remove the ECU pan.
1 Disconnect the two cable connections.
2 Partially unwind the cables from their cable guides.
3 Remove the two screws securing the assembly to the printer chassis.
4 Lift paper feed frame away form chassis, being careful not to damage sensor flags.
NOTE: Reassembly note: Be sure to seat the tab into the frame.