HP 1100AHP - Manual (Page 111)

C4224-90962 Bottom assemblies 109
Formatter pan removal (continued)
Figure 4-45 Removing the formatter pan (continued)
NOTE: Be careful not to damage or break the electronic cables and connections underneath the
formatter pan.
2 Slowly rotate the Formatter Pan away from the chassis.
3 Unplug the small connector cable and two flat flexible cables.
4 Slide the Formatter Pan free of the metal brackets.
5 To remove the Formatter from the Formatter Pan, remove the four screws securing the
Formatter.
NOTE: During reassembly, make sure the pan is reseated in the brackets.