HP 1100AHP - Manual (Page 73)

C4224-90962 External assemblies and covers 71
Printer door removal (continued)
Figure 4-8 Disconnecting the stabilizer bars
To disconnect the two stabilizer bars from the front cover:
3 Move the printer door slightly back toward the “closed” position to ease tension on the
stabilizer bar connection.
4 Using a small, flat-blade screwdriver, press down on the plastic connecting snaps
underneath the end of the stabilizer bar (callout 1).
5 Push up on the end of the stabilizer bar, and slide the connector out of the bracket
(callout 2).