HP 1100AHP - Manual (Page 152)

150 Troubleshooting/Maintenance C4224-90962
Figure 5-8 NVRAM PJL Factory Variables
To use these commands you need some method of sending PJL commands to the printer,
either with a software tool or by copying down a binary file containing the commands from
the host using a DOS box. For example from the DOS prompt:
copy /b filename lpt1
Here is an example file that uses one of the commands:
ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID
@PJL ‘command’
@PJL RESET
Here is an of using the NVRAMINIT command:
ESC%-12345X@PJL SET SERVICEMODE=HPBOISEID
@PJL NVRAMINIT
@PJL RESET
084#/2,.8CTKCDNGQT%QOOCPF 2QUUKDNGUGVVKPIU
DEFAULT PAPER "LETTER", "LEGAL, "A4",
"EXECUTIVE”, "COM 10”,
"M ONARCH”, "D L”, "C5”, "B5",
"CUSTOM "
DEFAULT LPARM :PCL SYM SET 41/#0+51.+51.
+51.2%2%&02%
2%2%6-9+0.
9+0.9+0.&'5-612
256':680+06.8075
/527$./#6*25/#6*
80/#6*2+(106.')#.
+51+51+51+51
+51+51+51+51
9+0
DEFAULT O EM “O N”, “OFF”
DEFAULT PRINTPAGECOUNT 0-2147483647
DEFAULT SCANPAGECOUNT 0-2147483647
DEFAULT COPYPAGECOUNT 0-2147483647
CLEARNVRAM None - Com m and
NVRAM INIT None - Com m and