Hitachi SJ-FB - Manual (Page 17)

17
Chapter 5 SETTING
5.3 Inverter Configuration Parameters for the SJ-FB Board
Code Function name Setting range Initial data
Setting
on run
Change
mode on
run
A044 1 st control method
00(VC) / 01(VP1.7power) / 02(Free V/f Setting)
/ 03(SLV) / 04(0Hz area SLV) / 05(V2)
00 - -
H001
Auto-tuning mode
selection 00(NOR : Invalid) / 01(NRT : not rotate)/ 02(AUT :
rotate)
00 - -
H002
1 st motor constant
selection
00(Hitachi standard motor constant)/
01(Auto-tuning data)/
02(Auto tuning data with online auto-tuning)
00 - -
H003
1 st motor capacity
selection
0.20 - 75.0(kW)
Setting on
forwarding
- -
H004
1 st motor pole
selection
2/4/6/8 (Poles) 4 - -
H005
1 st motor speed
response setting
0.001 - 9.999 / 10.00 - 65.53 1.590
H006 1 st stabilized factor 0. - 255. 100.
H020 1 st motor R1 setting 0.000 - 9.999 / 10.00 - 65.53( Ω)
depends on
the motor
capacity
- -
H021 1 st motor R2 setting 0.000 - 9.999 / 10.00 - 65.53( Ω)
depends on
the motor
capacity
- -
H022 1 st motor L setting 0.00 - 99.99 / 100.0 - 655.35(mH)
depends on
the motor
capacity
- -
H023 1 st motor I
0
setting 0.00 - 99.99 / 100.0 - 655.35(A)
depends on
the motor
capacity
- -
H024 1 st motor J setting
0.000 - 9.999 / 10.00 - 99.99 /
100.0 - 9999.(kgm 2 )
depends on
the motor
capacity
- -
H030
1 st motor R1 setting
(Auto-tuning data)
0.000 - 9.999 / 10.00 - 65.53( Ω)
depends on
the motor
capacity
- -
H031
1 st motor R2 setting
(Auto-tuning data)
0.000 - 9.999 / 10.00 - 65.53( Ω)
depends on
the motor
capacity
- -
H032
1 st motor L setting
(Auto-tuning data)
0.00 - 99.99 / 100.0 - 655.35(mH)
depends on
the motor
capacity
- -
H033
1 st motor I
0
setting
(Auto-tuning data)
0.00 - 99.99 / 100.0 - 655.35(A)
depends on
the motor
capacity
- -