Document Outline

• CONGRATULATIONS
• INSTRUCTION BOOK SINGER* quantum XL 1
• CONTENTS
• Accessories
  • Principal Parts
• Major Functions
  • Presser foot lifter/threac) cutting lever
  • Reverse stitch button
  • Presser foot pressure
  • Stitch balance control
• Important Safeguards
  • When not In use, be sure to turn the power switch OFF and unplug the machine.
  • Do not use thinner or other similar solvents to clean the machine.
  • Do not expose the machine to direct sunlight or humid atmosphere.
  • Connecting The Machine
    • Running The Machine
    • Running the machine without foot control
      • Note: #1. When the foot control is plugged in, the start/stop switch can only be used to stop the machine. #2. When the foot control is plugged in, the sewing speed setting lever will not operate.
  • Threading The Machine
    • Automatic Needle Threading
• Changing The Presser Feet
  • 1 Remove the presser foot.
  • Types Of Feet And Their Application
  • stitch Length Of Each Stitch Pattern
    • How To Adjust The Stitch Length
    • How to use the stitch length manual override buttons
  • Automatic Thread Tensiori Control
  • Indicator Lights
    • Important
• Fabric, Thread And Needle Table
  • Select
  • Begin sewing.
  • Adjust the sewing speed.
  • Cut the thread.
  • Lift the presser foot and remove the material.
  • How to perform shirring and gathering
  • How To Use The Thread Cutting Groove (How to knot the threads)
    • Remove the material from the machine.
    • Knot the two threads on the wrong side of the fabric.
  • Zigzag Stitch
    • Select the desired stitch pattern.
    • Stitch width vs. stitch length
• Automatic Buttonholes
  • Remove the button. U Mark the material.
  • Lower the buttonhole lever
  • Begin sewing.
  • Sewing Corded Buttonholes
    • How to set the cord.
  • Free Arm Sewing
    • Application examples
• Overcasting (Overedging)
  • Select the desired stitch pattern.
  • Replace the presser foot.
  • And Name Of Each Button
  • Large Size Pattern Sewing (1)
    • Select a pattern, and check the pattern number.
    • m Select a pattern, and check the I pattern number.
    • Press reverse button, nt Begin sewing.
    • Completion.
  • Large Size Pattern Sewing (2)
    • ^Alphabet Stitch
      • Select a pattern, and check the
    • Continuous Pattern Stitch
    • Types Of Large Size Continuous Pattern Stitch
      • Select a pattern, and check the
      • Select the pattern No. «1 Begin sewing.
      • Completion.
• How To Combine Patterns (Example)
  • Select a combination of pattern.
  • 2 numbers.
  • Press memory button.
  • For example (combination of the large size pattern figures)
  • For example (combination of large size pattern figure and patterns on
  • Balancing The Shape Of A Pattern
    • Reduced size
    • Reduce & Reverse
    • Liquid crystal display.
    • Select the correct pattern number (22).
    • Press the memory button.
    • Press the memory button.
  • Four Direction Sewing
  • Attaching Feed Cover
  • Darning Stitch
    • Use four direction sewing for free-arm sewing.
    • Select pattern No.94 Begin sewing and
  • Twin Meedle Sewing (Optional)
    • Attaching
    • Check that the
    • 5 Application examples
• Blindstitch
  • Select the bllndhem stitch
  • 0<i
    • For blindstitching general fabrics or heavy-weight materials
    • For blindstitching light-weight fabrics
      • 1 Fold the fabrics.
      • Turn the fabric over.
      • If the stitches fall to reach the folded edge:
      • if the stitches cover the folded edge too much:
• Patch Work
  • Select a pattern.
  • Inserting Zippers
    • Lapped Insertion
    • Centered Insertion
  • Optional Accessories
    • Cording foot
    • Even feed foot
    • Twin needle/Spooi pin
  • How To Adjust The Bobbin Case
  • How To Remove The Face Cover
    • Cleaning
    • Lubricating The Machine
• Performance Checklist