Automatic thread tensiori control, Automatic thread tension control, Ao g – SINGER XL1 Quantum User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Automatic Thread Tensiori Control

The thread tension is automatically computer controlled.

The upper thread and bobbin thread should interlock at the middle of the fabric thickness as shown bellow.
The thread tension control is set to “AUTO” whenever the power switch is turned ON or a stitch pattern is selected.

Upper thread

■Indicates that the automatic tension control is on.

How

to

adjust

thread

tension

Use the thread tension manual override buttons to change the thread tension.

ao g

-----

Press this button to increase
thread tension.

Press this button to decrease
thread tension.

if the bobbin thread of the

formed stitches is seen on the

right side of the cloth as
illustrated, it means that the
upper thread tension is too
high.

If the upper thread of the
formed stitches is seen on the
wrong side of the cloth as
illustrated, it means that the
upper thread tension is too low.

Bobbin thread

. V

Bobbin thread Fabric

(Wrong side)

For decreasing
upper thread
tension

For increasing
upper thread
tension

Note: When you select a combination of patterns from No.OO to No.98, use the thread tension override button on the first pattern.

The thread tension which has been set once will automatically apply to the all of the following pattern stitches.

12

Advertising
This manual is related to the following products: