SINGER XL1 Quantum User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
(1) Bo sure that the needle is up.
(2) Open the latch of the
bobbin case, and remove.
5
Piace the spool onto
the spool pin.
(1) Be sure that the notch on
the spool is on the right
side.
(2) Use the cap to hold the
spool in place.
(3) Refer to the following
instructions for the proper
use of the large and small
thread spool cap.
Puli the thread into the
groove of the thread
sensor guide.
Hook the thread onto
the bobbin winder
thread guide.
Advertising
This manual is related to the following products: