How to correct patterns – SINGER XL1 Quantum User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How To Correct Patterns
i n
Memory
When an undosired pattern has been placed in memory in a combination of pattern stitches.
* The clear button will operate only when the memory button has been pressed.
* Pressing the clear button will clear the pattern numbers which have been selected.
* Memory of the undesired patterns will be cleared in order from the pattern which was selected last.
‘ Continue to press the clear button and all the patterns which have been selected will be cleared one at a time.
* Turning the power switch OFF, or selecting a pattern from the instant patterns, will clear tire memory.
‘ To clear the reduced size or reverse pattern press the button again.
When the last selected pattern number ttiat has been
placed in memory is not a desired one.
A
i O !
{ ........./r J
20
21
^
22 *
t___ r::... ...i
are the desired patterns.
A
mmS
f.................. I
20
21
1................]
are selected by mistake
1
Press the clear button once.
The last pattern number selected (24) Is cancelled.
Pattern No. 21 (B) which has been set in the second place
will be on the liquid crystal display.
When an undesired pattern number is selected in the middle.
1
Press the clear button twice.
A
V................}
1
t
1 }
c
20
1 21 i
t ^ .
...... ..... ...t
22
are the desired patterns.
A
i {
1 j
1
Ip 1
f i
20
1 22
^
u .......... j
are selected by mistake.
Pattern No. 20 (A) which was selected first will be on the
liquid crystal display.
32