Connecting the machine, Running the machine, Running the machine without foot control – SINGER XL1 Quantum User Manual
Page 7: Threading the machine , 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting The Machine
the machine.
Running The Machine
Power/Hght switch
■■ When the “1" side of the power switch is pressed the machine will be turned on.
- When the “O” side of the power switch is pressed the machine will be turned off.
Note:
The power switch must be on before the light switch will operate.
To run the machine depress the foot-operated speed controller. The harder you press,
the faster the machine will sew.
To stop the machine, remove your foot from the controller.
Running the machine without foot control
The foot control must be unplugged for the starf/stop switch and sewing speed setting lever to operate as described.
Start/stop switch
Sewing speed setting lever
One press on the switch
starts the sewing machine,
and another press on the
switch stops the sewing
machine.
the desired sewing speed.
Note: #1. When the foot control is plugged in, the start/stop switch can only be used to stop the machine.
#2. When the foot control is plugged in, the sewing speed setting lever will not operate.