FUJITSU MHT2060BH - Manual (Page 136)

Interface
5-62 C141-E203-01EN
Table 5.18 Data format of SMART Summary Error Log (2/2)
Byte Item
5C to 1C3
Error log data structure 2
to
Error log data structure 5
1C4, 1C5 Total number of drive errors
1C6 to 1FE Reserved
1FF Check sum
•
Command data structure
Indicates the command received when an error occurs.
•
Error data structure
Indicates the status register when an error occurs.
•
Total number of drive errors
Indicates total number of errors registered in the error log.
•
Checksum
Two's complement of the lower byte, obtained by adding 511-byte data one byte at a
time from the beginning.
•
Status
Bits 0 to 3: Indicates the drive status when received error commands according to
the following table.
Bits 4 to 7: Vendor unique
Status Meaning
0 Unclear status
1 Sleep status
2 Standby status
3 Active status (BSY bit = 0)
4 Off-line data collection being executed
5 to F Reserved