FUJITSU MHT2060BH User Manual
Page 164
Interface
5-90 C141-E203-01EN
8C73h
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
C837h
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
Others Reserved
*4 Word 49: Capabilities
Bit 15-14: Reserved
Bit 13:
Standby timer value. ATA spec is '1.'
Bit 12:
Reserved
Bit 11:
'1' = IORDY supported
Bit 10:
'1' = IORDY inhibition supported
Bit 9:
'1' = DMA supported
Bit 8:
'1' = LBA supported
Bit 7-0:
Undefined
*5 Word 50: Device capability
Bit 15:
0
Bit 14:
1
Bit 13 to 1 Reserved
Bit 0
Standby timer value '1' = Standby timer value of the device is the
smallest value.
*6 Word 51: PIO data transfer mode
Bit 15-8:
PIO data transfer mode
X’02’=PIO mode 2 supported
Bit 7-0:
Undefined
*7 Word 53: Enable/disable setting of word 54-58 and 64-70
Bit 15-3:
Reserved
Bit 2:
'1' = Enable the word 88
Bit 1:
'1' = Enable the word 64-70
Bit 0:
'1' = Enable the word 54-58