FUJITSU MHT2060BH User Manual
Page 165
5.3 Host Commands
C141-E203-01EN 5-91
*8 Word 59: Transfer sector count currently set by READ/WRITE
MULTIPLE command
Bit 15-9:
Reserved
Bit 8:
'1' = Enable the multiple sector transfer
Bit 7-0:
Transfer sector count currently set by READ/WRITE MULTIPLE
command without interrupt supports 2, 4, 8 and 16 sectors.
*9 Word 63: Multiword DMA transfer mode
Bit 15-11: Reserved
Bit 10:
'1' = multiword DMA mode 2 is selected.
Bit 9:
'1' = multiword DMA mode 1 is selected.
Bit 8:
'1' = multiword DMA mode 0 is selected.
Bit 7-3:
Reserved
Bit 2:
'1' = Multiword DMA mode 2, 1, and 0 supported (Bit 1 = 0 = '1')
Bit 1:
'1' = Multiword DMA mode 1, and 0 supported (Bit 0 = '1')
Bit 0:
'1' = Mode 0
*10 Word 64: Advance PIO transfer mode support status
Bit 15-8:
Reserved
Bit 7-0:
Advance PIO transfer mode
Bit 1:
'1' = Mode 4 supported
Bit 0:
'1' = Mode 3 supported
*11 WORD 75: X ' 001F ' (32)
*12 WORD 76
Bit15-10: Reserved
Bit 9:
'1' = Supports the Power Management initiation request from
the host system.
Bit 8:
'1' = Supports the Native command queueing.
Bit 7-4:
Reserved
Bit 3:
Reserved for SATA
Bit 2:
'1' = Supports the Gen-2 signaling rete.
Bit 1:
'1' = Supports the Gen-1 signaling rete.
Bit 0: Reserved