FUJITSU MHT2060BH - Manual (Page 192)

Interface
5-118 C141-E203-01EN
•
SET MAX FREEZE LOCK (Features Field = 04h)
The Set MAX FREEZE LOCK command sets the device to SET_MAX_Frozen
state.
After the device made a transition to the Set Max Freeze Lock state, the following
SET MAX commands are rejected, then the device returns command aborted:
−
SET MAX ADDRESS
−
SET MAX SET PASSWORD
−
SET MAX LOCK
−
SET MAX UNLOCK
•
Error reporting conditions
(1) The device is in Set Max Locked mode or Set Max Freeze Locked mode
(ST = 51h, ER = 04h).
(2) The SET MAX ADDRESS (EXT) command has been issued
(ST = 51h, ER = 04h).
(3) A SATA communication error occurred (ST = 51h, ER = 14h).
At command issuance (Shadow Block Registers setting contents)
CM 1 1 1 1 1 0 0 1
DH x x x x xx
CH
CL
SN
SC
FR
xx
xx
xx
xx
04
At command completion (Shadow Block Registers contents to be read)
ST Status information
DH
CH
CL
SN
SC
ER
xx
xx
xx
xx
xx
Error information