FUJITSU MHT2060BH User Manual
Page 146
Interface
5-72 C141-E203-01EN
Host
Reg. HD
PIO Setup
PIO Setup
PIO Setup
Data (1sector)
Data
(4 sectors)
Device
Data
(4 sectors)
Block
Block
Partial
Block
Figure 5.9 Execution example of READ MULTIPLE command
•
Error reporting conditions
(1) A specified address exceeds the range where read operations are allowed
(ST = 51h, ER = 10h).
(2) The range where read operations are allowed will be exceeded by an address
during a read operation (ST = 51h, ER = 10h).
(3) An uncorrectable disk read error occurred (ST = 51h, ER = 40h).
(4) The sync byte indicating the beginning of a sector was not found
(ST = 51h, ER = 01h).
(5) The READ MULTIPLE command is disabled (ST = 51h, ER = 04h).
(6) A SATA communication error occurred (ST = 51h, ER = 0Ch).
(7) An error other than the above errors occurred (ST = 51h, ER = 04h).