FUJITSU MHT2060BH - Manual (Page 186)

Interface
5-112 C141-E203-01EN
(37) READ NATIVE MAX ADDRESS (X’F8’)
This command posts the maximum address intrinsic to the device, which can be set
by the SET MAX ADDRESS command. Upon receipt of this command, the device
indicates the maximum address in the DH, CH, CL and SN field. Then reports the
status to the host system.
•
Error reporting conditions
(1) A SATA communication error occurred (ST = 51h, ER = 14h).
At command issuance (Shadow Block Registers setting contents)
CM 1 1 1 1 1 0 0 0
DH x L x x xx
CH
CL
SN
SC
FR
xx
xx
xx
xx
xx
At command completion (Shadow Block Registers contents to be read)
ST Status information
DH x x x x Max head/LBA [MSB]
CH
CL
SN
SC
ER
CYL No. [MSB] / LBA
CYL No. [LSB] / LBA
SCT No. / LBA[LSB]
xx
Error information