Test print and restore button, To restore the factory default settings, For further infor – Motorola WPS870G User Manual
Page 12: User guide wps870g
User Guide
WPS870G
PAGE 5
Test Print and Restore Button
The Wireless Print Server is fitted with a Restore button. This button has two functions:
Prints a test page containing all current settings (if your printer supports this)
Restores the factory default settings
Power
USB
LAN
Reset
Parallel
Restore
Button
To generate a diagnostic test page:
Note: PostScript printers are unable to print this page. If you have a PostScript printer attached, the test page
will not be printed. Use a non-PostScript printer instead. Also, printers that only use GDI printer language
cannot print a diagnostic page.
1
Ensure that both the WPS870G and the attached printer are powered.
2
Press and release the Restore button. A test page prints containing the current settings.
To restore the factory default settings:
1
Press and hold the Restore button for 5 seconds.
2
After 5 seconds the WPS870G returns to its factory default settings:
– Returns the login password to its factory default value of “motorola”
– Sets the IP address assignment to dynamic (use DHCP server)
– Obtains an IP address