Motorola WPS870G - Manual (Page 95)

WPS870G
User Guide
PAGE 88
LPD on System V
Before beginning LPD Setup, ensure that an IP address has been assigned to the Wireless
Print Server. Keep the following points in mind:
The remote host name is the name of the Wireless Print Server.
The remote printer name is the print queue name for the Logical Printer. Logical
printers also need to be configured on the Wireless Print Server itself.
If your UNIX asks for the LPD type, be sure to identify the service type as BSD. The
Wireless Print Server’s LPD protocol meets BSD system standards.
In the sample commands shown, printer_name is the name of the Print Queue serviced
by the Wireless Print Server, and Spooler_directory is the name of the directory, which
is used to spool the print jobs.
Procedure Table
Action Sample Command
Stop Print Services /usr/lib/lpshut
Add a System Printer /usr/lib/lpadmin -p printer_name -v /dev/null
Restart the Print Services /usr/lib/lpsched
Enable printing to the new
printer device
enable printer_name
Start accepting jobs for
the new printer device
accept printer_name
Create a spooling
directory
mkdir /usr/spool/Spooler_directory
Make spooling daemon the
owner of this directory chown daemon /usr/spool/Spooler_directory
Create read/write
permissions chmod 775 /usr/spool/Spooler_directory
Give permissions to LPD
processes. chgrp daemon /usr/spool/Spooler_directory
Add remote printer(s) See following section