Motorola WPS870G - Manual (Page 88)

User Guide
WPS870G
PAGE 81
Unix
®
Troubleshooting
Print Server is not recognized.
Check the following:
The network cable is OK.
There are no routers between the Print Server and the UNIX host during IP address
assignment.
There are no NetWare File Servers without TCP/IP support between the Print Server
and the UNIX host.
You have used the correct hardware address, as shown on a sticker on the base of the
device.
Use the ping command to see if the Print Server is a valid device on the network.
The Print Server’s IP address is forgotten and it needs to be installed in a new environment.
Use the Restore button to restore the factory default settings, as described below, then
configured as a new device. See
Test Print and Restore Button for details on resetting it.