Connecting to the wps870g, Wps870g user guide – Motorola WPS870G User Manual
Page 43
WPS870G
User Guide
PAGE 36
Connecting to the WPS870G
The screenshots seen here are intended for reference only; your version of firmware may differ slightly.
Your WPS870G must have received an IP address for you to connect to it, either by
manually assigning it or by being assigned an IP address by your router.
1
Start your Web browser.
2
In the URL field, enter http:// followed by the IP address of the WPS870G, for example:
192.168.10.3. This is the IP address you assigned during installation. If this is the first
time you are logging into the device, it is recommended that you bookmark the address
for easy retrieval.
3
Type the password. The default password is “motorola.”
4
Press E
NTER
or click LOG IN. The default login page is displayed:
Use the menu bar at left to navigate major sections. Use the tabs across the top to open
different sub-sections of the major section selected.