Motorola WPS870G - Manual (Page 9)

WPS870G
User Guide
PAGE 2
Safety Instructions
For your own safety, and to protect your Wireless Print Server, please observe the following
safety advice:
Unplug this device from its power source before cleaning. Use only a slightly dampened
cloth for cleaning. Do not use liquid or aerosol cleaners.
Avoid using this device near water. Exposure to water poses an electric-shock hazard.
Do not place the Wireless Print Server on an unstable surface. The device may fall
causing serious damage to the device.
This device should only be used with the power supply type specified on the product
label.
Do not pinch, crimp or otherwise damage the power cord. If exposed to foot traffic,
ensure that the cable is properly shielded and does not pose a tripping hazard.
If using an extension cord, make sure the total current rating of the products using the
cord does not exceed the extension cord's current rating.
Do not attempt to service this device, as opening or removing casing may expose you
to dangerous voltage points or other risks. Refer all servicing to qualified service
personnel.
The Wireless Print Server should be serviced by qualified service personnel under the
following conditions:
– The power cord is damaged or frayed.
– Liquid has been spilled onto the device.
– The device has been exposed to rain or water.
– The device does not operate normally in accordance with the operating instructions.
– The casing has been damaged.