Computer to wps870g connection, User guide wps870g – Motorola WPS870G User Manual
Page 18
User Guide
WPS870G
PAGE 11
2
With the other end of the same Ethernet cable, plug it into the LAN port of your
WPS870G.
3
Plug in the power plug to the WPS870G and the other end into an electric outlet. The
LAN LED illuminates when successfully connected.
Computer to WPS870G Connection
If you are connecting the WPS870G directly to your computer, that computer must first be
equipped with an Ethernet adapter card. Use a crossover Ethernet cable for this procedure;
a crossover cable is not supplied.
To connect the WPS870G to your computer:
Power
USB
LA N
Reset
Parallel
crossover Ethernet cable
WPS870G
To power
Computer
1
Using the crossover Ethernet cable, take one end and plug it into the LAN Ethernet port
on the back of your computer. If you already have an Ethernet cable plugged into the
port, you can temporarily remove it for this procedure. Remember to replace the cable
after this set up is completed.
2
Plug the other end of the same crossover Ethernet cable into the LAN port of your
WPS870G.
3
Plug in the power plug to the WPS870G and the other end into an electric outlet. The
LAN LED illuminates when successfully connected.