Motorola WPS870G - Manual (Page 74)

User Guide
WPS870G
PAGE 67
IPP Client Configuration – Windows 98SE/ME
To configure the IPP client in Windows 98SE/ME:
1
Navigate to the program by clicking Start > Programs > IPP Port Monitor >
Add IPP Port
. The Configure IPP Port window is displayed:
2
Enter the IP Address or URL of the IPP Server. If using a router with forwarding
capabilities, then enter the router’s IP address. If you are assigned a public IP address
from your ISP, enter that IP address.
3 If Internet access from your location is using a Proxy Server, check Access IPP Server
via Proxy Server
, and enter details of your Proxy Server (this will be the same as your
Browser configuration). For Port Number use 631.
4
If necessary, click Select Device Port to view the available ports on the WPS870G,
and select the appropriate port.
5 Click Save.